Please search for the key words of MAANSHAN JINGWEI NEW ENERGY DRIVE EQUIPMENT CO., LTD!

Horizontal closed type

Horizontal enclosed slewing drive

Word:[Big][Middle][Small] QR Code 2019/9/24     Viewed:    

卧式封闭型回转减速机


Product features:

1. The horizontal structure enables the product to be installed horizontally, vertically and obliquely. It has the characteristics of flexible installation and diversity. Compared with other types of reducer, it has the characteristics of small volume, convenient installation and maintenance.
  2. The product adopts blind hole design and framework oil seal structure, with reliable sealing performance. The sealing position can avoid direct sunlight, and can effectively prevent dust and water. The protection grade can reach IP65, which is suitable for outdoor use.
  3. Special machine tools are used to produce toroidal worm, which has multi tooth contact and can transmit large torque, and can bear greater axial force, radial force and overturning moment.
4. The product design adopts the general size at home and abroad, which is convenient for later replacement.

Application range:

1. It can be used for the horizontal rotation of solar tracking system, and can also be applied to some special engineering machinery and industrial equipment.
   - rotation of chassis or boom of various construction machinery
   - rotation of aerial work vehicle chassis
  2. It is used in photovoltaic single axis and double axis tracking system, concentrating photovoltaic tracking system, tower heliostat, dish Stirling power generation, trough type heat gathering power generation and heating system.

Application advantages:

1. the surface of the product is treated by electrostatic powder spraying for two times, using epoxy zinc rich base powder and epoxy resin flour, which greatly improves the corrosion resistance and anti-aging ability of the product. Neutral salt spray test for more than 1000 hours.
  2. The raceway of slewing bearing and gear tooth surface are quenched, with high hardness and strong rigidity.
  3. It has self-locking function and improves the safety of use.
  4. The transmission accuracy can reach 1 milliradian (1mard).
  5. The product is developed based on the principle of maintenance free, with minimal maintenance.
  6. The load and overturning moment of the product are greater than that of the similar products in the market.
  7. The product has been tested at high and low temperature and has strong resistance to temperature difference.
  8. It adopts national high-tech graphene synthetic grease, whose service life and heat dissipation efficiency are far better than ordinary grease.
  9. Toroidal worm design, multi tooth contact, bearing large output torque.

Performance parameters comparison table:

Model Reduction ratio Output torque KN.M Overturning moment KN.M Holding torque KN.M Axial load (static) KN Axial load KN Radial load KN(quiet) Radial load KN(move) accuracy auto-lock weight(KG) efficiency
5” 62 0.6 3.1 5 45 13.8 22.6 11.8 0.15 Yes 15 40%
7” 71 1.2 13 10.6 133 32 53 28 0.15 Yes 16 40%
9” 61 6.5 21.3 36 338 81 120 61 0.15 Yes 55 40%
12” 78 7.6 40.85 43.7 475 108.3 180.5 95 0.15 Yes 60 40%
14” 85 8 67.6 45 553 133 220 117 0.15 Yes 67 40%
17” 102 10 97.8 65.6 970 235 390 205 0.15 Yes 110 40%
21” 125 15 193 105 1598 360 669.2 320 0.15 Yes 180 40%
25” 150 17.1 268.6 150.4 1824.7 456.2 760 427.5 0.15 Yes 193 40%
Go Back
Print
[Upward]